Search found 765 matches

by RAMOS
Wed Aug 31, 2016 1:24 pm
Forum: Reloading the .204 Ruger
Topic: Decapping die?
Replies: 7
Views: 2522

Re: Decapping die?

I use a Redding decapping die with the small rod. Use it for all of my cases. Removed the pin from all of my sizing dies. I like to check/clean primer pockets then tumble before sizing. Not the only way to go about it but, that's how I do it.
by RAMOS
Fri Jun 10, 2016 7:59 am
Forum: Reloading the .204 Ruger
Topic: brass options
Replies: 16
Views: 7683

Re: brass options

I agree with Duker. Norma/Nosler should put you into some real nice 204R brass. All of mine is WW and about eight or nine years old. It's been, and still is, great. However, most everything I have heard about WW 204R brass in the last two years has led me to believe that the quality has become much ...
by RAMOS
Tue May 10, 2016 4:11 pm
Forum: Reloading the .204 Ruger
Topic: bullet seating question (Lee dies)
Replies: 16
Views: 4030

Re: bullet seating question (Lee dies)

I have two thoughts to share. The second one is not meant to hurt anyone's feelings, just my own opinion based on my own experiences. 1. Annealing is always a good thing. It prevents split necks and enhances accuracy by promoting more even tension. While machines are faster and more convenient, they...
by RAMOS
Mon Apr 25, 2016 9:19 am
Forum: Swap Meet
Topic: LTB Bushing
Replies: 3
Views: 1673

Re: LTB Bushing

Varmint Shooter, I have Redding regular and coated bushings. Nothing wrong with them. I also have bushings from CRT that Brad has designed and given you a link to in the above post. All of my future bushing purchases will be from Brad. My own opinion is that they are super smooth and size a tad clos...
by RAMOS
Fri Apr 22, 2016 8:59 am
Forum: .204 Ruger Forum
Topic: consistent groups and "hold"
Replies: 14
Views: 2980

Re: consistent groups and "hold"

Sorry again. This is beyond my pea brain capacity. The only way I can post pictures is to send them to someone else with my phone and beg for help. Gave up a few years ago, it just never 'clicked' for me. The guys who posts pictures on here will tell you it's simple. Don't ever trust them... :wink:
by RAMOS
Thu Apr 14, 2016 11:14 am
Forum: General Reloading
Topic: OUTSIDE NECK TURNING?
Replies: 22
Views: 8320

Re: OUTSIDE NECK TURNING?

The individual who I had hoped would post on this must be out on a Skippy Safari. It is that time of year! :wink:
by RAMOS
Mon Apr 11, 2016 9:56 am
Forum: General Reloading
Topic: OUTSIDE NECK TURNING?
Replies: 22
Views: 8320

The K&M case holder

Sounds like Del has you lined out. I will share what comes to mind, the differences are mainly due to using tools from a different manufacturer. Lube: I always used Sinclair Neck Turning Lube and liked it. This last Winter I was running low and feeling cheap so I asked what other guys were using and...
by RAMOS
Wed Mar 23, 2016 10:18 am
Forum: Reloading the .204 Ruger
Topic: Bullet weight
Replies: 5
Views: 2576

Re: Bullet weight

Love my beam scales! What one are you using? Make sure your knife edges and bearings are squeaky clean. I use Q-Tips and starting fluid. Using a loupe is a handy way to inspect the knife edges for burrs and dings.
by RAMOS
Tue Mar 22, 2016 3:49 pm
Forum: Reloading the .204 Ruger
Topic: Bullet weight
Replies: 5
Views: 2576

Re: Bullet weight

If you can't beg, borrow or steal (not recommended) a bona fide check weight, grab your bullet and head to town. A lab, pharmacy or dentist office should be able to weigh it for you in grams or milligrams. Ask them NOT to round the weight off. One gram=15.4324 grains.
by RAMOS
Fri Mar 18, 2016 8:55 am
Forum: General Reloading
Topic: Hand held priming unit
Replies: 4
Views: 2139

Re: Hand held priming unit

Absolutely love my Sinclair hand priming tool. Feels good in the hand, superb craftsmanship. Excellent tactile feedback, you can feel the primer enter the pocket and feel when it contacts the bottom. Adjustable and lockable for seating depth, as well. Some may not care for the fact that it is single...
by RAMOS
Thu Mar 17, 2016 9:57 am
Forum: General Reloading
Topic: Trimming brass
Replies: 8
Views: 3984

Re: Trimming brass

Measure your chamber length and trim a couple thousandths shorter than that. Published 'trim-to' length is most likely shorter than needed.
by RAMOS
Thu Mar 17, 2016 8:46 am
Forum: Reloading the .204 Ruger
Topic: ? for Advanced Reloaders
Replies: 7
Views: 2173

Re: ? for Advanced Reloaders

My approach is pretty much the same as what the others are saying. Pick a bullet based on intended purpose. I use two different bullets in my 204R, one for rodents and a different one for predators. If you have a 20 caliber with a 1:12 twist, avoid the 40 grain V-Max. It may work but, the odds are n...
by RAMOS
Fri Mar 11, 2016 5:53 pm
Forum: Optics
Topic: Scope for .204!
Replies: 29
Views: 23587

Re: Scope for .204!

futuretrades: I hope your correct about Leupold being made in the USA. I've read several articles that say Leupold is now getting their glass from China have some parts made outside the US. I just bought a Leupold 8.5x25x50 LR VHR for around 900.00 and it came with a large Leupold window sticker th...
by RAMOS
Tue Mar 08, 2016 10:04 am
Forum: Reloading the .204 Ruger
Topic: Case trimmer
Replies: 7
Views: 2305

Re: Case trimmer

I too, am a fan of the Wilson/Sinclair system. You can make your own stand and retainer to save a few bucks. FWIW, I would not be afraid of buying a used trimmer for a fair price. Cutters can be sharpened and/or replaced. I would look at Wilson, Forster and Redding. Best of luck, I understand all to...
by RAMOS
Fri Feb 12, 2016 9:42 am
Forum: Hunting with the .204 Ruger
Topic: The squeaks are out
Replies: 14
Views: 5981

Re: The squeaks are out

RJ, if you are East of the Cascades, never, ever, curse the mud. Nothing more precious out here than moisture. Of course, if you are on the West side, can't do anything for you except offer my condolences. :wink: I am east and its slicker than snot. Luckily we still have a good amount of snow in th...