300 WSM

Ask questions and share information about reloading.
Post Reply
User avatar
Ray P
Senior Member
Posts: 646
Joined: Sat Dec 31, 2005 10:32 am
.204 Ruger Guns: 2-Rem 700 and Ruger#1 S/S
Location: NE Pa
Contact:

300 WSM

Post by Ray P »

Happy New Year to all and hope 2008 is a safe and healthy one too. I need tp pick your brains on Winchester Mod 70 Coyote stainless 24" barrel wood laminated stock, glass bedded from the factory. I had the troat opened up to try 190 bergers and a no go. Can't find a pet load for her with bullet weight between 150 to 190. Can't get less than a inch group for 3 shots at a 100 yrds. This is ok for hunting , but not acceptable to me. Any suggestions would be appreciated. Just to help a little, I got and tried norma brass, different seating lenghts, powders and primers.............I think I'm ready to change out the barrel. The factory barrel has me puzzled cleans up well and no signs of copper problems.
Thanks for any help
Ray P
Life is an adventure and often to short. Make the most with family and friends. Shoot often and shoot a small hole. Love the 204 Ruger!! NRA Life Member
"We are never to old to learn"
trevort
Junior Member
Posts: 98
Joined: Fri Nov 11, 2005 5:01 am
.204 Ruger Guns: stiller predator, lilja no 5 1 in 12
Location: Melbourne Australia

Re: 300 WSM

Post by trevort »

In mine, I got (a one time only thing, but it did happen) a 3 shot clover leaf at 100m with 65gn ADI 2209 powder, CCI magnum primer and 165gn Hornady SST . Rifle is M70 sporter laminated stock blued barrel.

Hodgdon repackage and sell ADI powders but I'm sorry, I dont know which one is 2209. (Like I know 2208 is varget and 2206h is H4895) Someone should be along to enlighten you shortly!
Kiwishooter
New Member
Posts: 13
Joined: Thu Feb 07, 2008 1:34 pm
.204 Ruger Guns: Kimber Pro Varmint .204 & Bushnell Elite 4200 4-16 x 40

Re: 300 WSM

Post by Kiwishooter »

ADI 2209 is rebranded by Hodgon as H4350.

Regards,

Michael.
Post Reply