- 8D47CDE0-B5F7-42AF-81B1-DD3AF3A45345.jpeg (418.99 KiB) Viewed 8226 times
- 8D47CDE0-B5F7-42AF-81B1-DD3AF3A45345.jpeg (418.99 KiB) Viewed 8226 times
Barrett Upper
BCM Gunfighter CH
FA BCG
KAC 3.1 URX 13.5” Slim Rail
Low Profile Gas Block
Shilen SS 24” Varmint Barrel
KAC URX Wrench P/N 20495
New Unopened KAC Barrel Nut P/N 20496
Willing to sell barrel separately. Cross posted so first “I’ll take it,” gets it. Surefire FH not included in sale.
Great prairie dog gun. I shot it with an Atlas bipod and PRS stock as well as some nice glass and a Geissele trigger. Probably around 300 rounds thru it as I found I preferred my CZ455 in 17HMR for most shooting. This comes with some hard to find extra parts. I bought this URX used. KAC recommends replacement upon removal and reinstallation, but at that time I could not find a replacement barrel nut. I went ahead and installed it and bought a replacement barrel nut when they became available. But the rifle shot so nicely I set the new barrel nut aside and never replaced the old one. So I’m throwing in the new barrel nut along with the genuine KAC URX wrench, also hard to find. The slimline stock fits so tight around the heavy barrel that I had to cut away a small part of the bottom front (shown in picture) to get the URX to slide in. The BCG came off a service rifle and the bolt is etched with some numbers. It felt a little stiff when I removed it so I did some light cleaning on it but it needs a good heavy cleaning. The extractor probably needs a new spring but was functioning when last used.
$750 for everything, shipped insured. Prefer Zelle or Venmo but will accept PP F&F (or add 3.5%). I’ll also accept a USPO money order or a personal check but no shipment until check clears.