6mm Creedmoor

Talk about or share information about your Ruger centerfire rifles.
Post Reply
foxwhistler
Senior Member
Posts: 183
Joined: Sat May 19, 2007 4:03 pm
.204 Ruger Guns: Remington L.V.S.F
Location: ceredigion, wales

6mm Creedmoor

Post by foxwhistler »

Picked this up from the smith yesterday. Not great pics yet but I'll get some better ones when I get a chance to get outside to shoot it! I bought it as a 220 swift barreled action which included a Timney trigger and rail and a tactical large boltknob!! Spec is,
Action trued, firing pin hole reduced, and bolt fluted and polished.
Bartlein 8 twist 5T barrel, fluted, bead blasted and threaded 18x1 with an invisible thread protector!
This was dropped into a fully bedded HN precision stock which was on my 204! I've got a wildcat sound moderator to put on it and also a Kwik Klip magazine to fit! It also has Tier One scope rings and a Delta Javelin 4.5-30x56 scope!
Attachments
20230325_162017.jpg
20230325_162017.jpg (2.7 MiB) Viewed 15866 times
20230325_161801.jpg
20230325_161801.jpg (1.58 MiB) Viewed 15866 times
I only have to be lucky once,
the fox has to be lucky every time!
Image
Bill K
Senior Member
Posts: 2622
Joined: Tue Jan 18, 2011 10:00 am
.204 Ruger Guns: also now, a Savage switch bull barrel in 204R. 23 inch SS
Location: Lake Forest, Ca.

Re: 6mm Creedmoor

Post by Bill K »

Keep us updated, with more photo's and target grouping. :)
skipper
Moderator
Posts: 1618
Joined: Thu Feb 09, 2006 3:32 am
.204 Ruger Guns: Remington XR 100, Custom build Lilja/Panda/Shehane/Jewell
Location: Cypress, TX

Re: 6mm Creedmoor

Post by skipper »

:eek: If I were a fox, I'd be shaking in my boots. :eek:
Image Hold 'em & Squeeze 'em
foxwhistler
Senior Member
Posts: 183
Joined: Sat May 19, 2007 4:03 pm
.204 Ruger Guns: Remington L.V.S.F
Location: ceredigion, wales

Re: 6mm Creedmoor

Post by foxwhistler »

As soon as I get a load made up I'll let you know how it shoots! I'm planning to start with 87gr V-max and then probably try the 103gr ELDX.
I only have to be lucky once,
the fox has to be lucky every time!
Image
User avatar
Rick in Oregon
Moderator
Posts: 5187
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: 6mm Creedmoor

Post by Rick in Oregon »

Lookin' good! That should do the job right well.

It appears it's NOT a good time to be a fox in Wales. :eek:
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
foxwhistler
Senior Member
Posts: 183
Joined: Sat May 19, 2007 4:03 pm
.204 Ruger Guns: Remington L.V.S.F
Location: ceredigion, wales

Re: 6mm Creedmoor

Post by foxwhistler »

Foxes don't appreciate the 204! Think they may like this even less!😉
I only have to be lucky once,
the fox has to be lucky every time!
Image
User avatar
Tom Kat
Senior Member
Posts: 630
Joined: Mon Sep 07, 2020 8:04 pm
.204 Ruger Guns: CZ 527, Ruger American Predator in Magpul Hunter stock

Re: 6mm Creedmoor

Post by Tom Kat »

I just threw one of those cheek risers away, looks like that one. I didnt like it much
"The difficulty lies not so much in developing new ideas as in escaping from old ones."

John Maynard Keynes
foxwhistler
Senior Member
Posts: 183
Joined: Sat May 19, 2007 4:03 pm
.204 Ruger Guns: Remington L.V.S.F
Location: ceredigion, wales

Re: 6mm Creedmoor

Post by foxwhistler »

It does the job! Not sure what stock it could end up in though!
I only have to be lucky once,
the fox has to be lucky every time!
Image
foxwhistler
Senior Member
Posts: 183
Joined: Sat May 19, 2007 4:03 pm
.204 Ruger Guns: Remington L.V.S.F
Location: ceredigion, wales

Re: 6mm Creedmoor

Post by foxwhistler »

Now fitted into a magpul stock! Got a good load with 87gr v-max! Will get a few target pics the next time I take it out!
Attachments
20230601_113207.jpg
20230601_113207.jpg (5.39 MiB) Viewed 15156 times
I only have to be lucky once,
the fox has to be lucky every time!
Image
Post Reply