Evnin charley; I shoot a rem 700 in 204.I use a .226 bushing for most of my loads. Depending on the thickness of the brass, I sometimes have to use a .224 or. 225 to get the right tension but I also use an expander button. A standard FL or neck die squeezes the neck down to .217 and the expander bu...

TrapperDan wrote:What seems to be the problem ?

Looking at my firered brass it is .230-231 now to my mind if i put it though a .227 bushing it would be ok but its not in some cases you can pull the heads out with your fingers.

shootingcharley

Hi guys i am looking for a little help on this one i have just got 100 new Nosler brass to use in my .204 Ruger i am having problems neck sizing it with my .227 bushing just wondered if any of you are using Nosler brass in .204 and what bushing you use for it.

Shootingcharley.

geoff23 wrote:I fitted a Boyd,s thumbhole to my ruger vt 223. seem to work fine

The stock i am looking at is a GRS stock if you Google it you will see why.

shootingcharley.

Hi guys i am looking at getting a custom stock for my Ruger M77 mark 2 V/T in .204 the people who do the stock tell me that they do the M77 inlet and this was taken from the .223 Hawkeye and will fit? Now i am not sure about this can any of you guys tell me if this is the case as i would hate to get...

Hi there i am looking to get a M77 MKII Weaver Style Scope Mount i have been in contact with Jack Weigand who make such a mount but they do not export them, but they tell me that Mountsplus do stock them and can export one to England for me. My rifle is a Ruger m77 MK11 VT with the short action i am...

Hi there i am looking to get a M77 MKII Weaver Style Scope Mount i have been in contact with Jack Weigand who make such a mount but they do not export them, but they tell me that Mountsplus do stock them and can export one to England for me. My rifle is a Ruger m77 MK11 VT with the short action i am...

Hi Anthony on the Ruger MKII VT you will be very much governed by the magazine unless you are prepared to load it one at a time, when i had the standard barrel on mine i was shooting 158 thou off the lands and it shot well with that, as you say the only way is to test a few and see what it likes. Ch...

Thanks guys keep the answers coming, the reason i am asking is i have some Remington Hornady and Nosler brass all mic out at .231 when loaded but when i try to use a .228 bushing i can push the heads in with my fingers now to me that is too little pressure but i can’t understand why the .228 will no...

Just trying to get some views on what people are using when reloading your .204 R what diameter Neck Sizer Die Bushing do you use? I am using a .226 at the moment.

shootingcharley

Guy;s give re-loader 7 a go it will give you all you need.

shootingcharley

Thank you so much i will give them a try.

shootingcharley.

Hi chaps can you do me a favour the main bolt firing pin spring on my Ruger M77 mark 2 Target Varmint is on the way out I keep getting misfires, I am trying to get one but no one seems to have one I have been quoted 60 days from Viking arms just wondered if you can ask around for me. They are only a...

Hi mate my M77 is the same i can't work out how to put the photo up i have

Send me a email at shootingcharley@gmail.com and i will send you the photo.


shootingcharley

Hi this is the best i can do http://www.jackweigand.com/7722s.html at the moment if you can give me your email address i have a photo of the mount. Here you my friend this is were you can get the mount. The M77 MK2 Short Action bases are in. Your cost is: $59.95 plus shipping. At the present time th...