stein wrote:Thats a definite maybe. I have found that usually it doesn't change much. But depending on whether you go hotter or not would make the most difference. What are you going to? And from?

I load RL-10x now, and was thinking about trying H4895 or 8208 XBR

If you change your powder, will you also have to find your seating depth again?

Hornady Brass sucks

I have about 50 out of 100 that I can't even get my primer pocket uniformer in the hole

Yea, I'm kinda glad it's that one, because any longer and they don't fit into my Ammo Boxes

Went to the range tonight to test my three loads. I settled on 25.1 RL10x. I was trying three different OAL's It's out of my Cooper M21 Varmint I don't have a chrono yet, so I'm not sure on the velocity http://i176.photobucket.com/albums/w175/m60g/P1010493.jpg http://i176.photobucket.com/albums/w175...

Anyone ever hunt on a reservation? Where? and how was it?

I was looking at going to Ft Belknap around Zortmen, MT, or maybe Rosebud in SD, or the Cheyenne River in SD

I use Shooters Choice and Butch's for powder fouling, and I started using KG-12 Copper Remover. Sinclair Bore Guide, and Pro Shot Brass Brushes and Nylon Brushes

I use a Dewey Rod and Pro shot jags with 1 1/4 Round patches from Brownell

:cry: I'm using RL 10x and 39 SBK's I'm confused as to where I should begin my reloads with regards to COAL. If I try to load factory COAL of 2.250, I will be .180 off the lands :eek: , That seems a bit excessive to me :duh: My measurement to the lands is 1.955 OGIVE Would 1.865 OGIVE be a good plac...

Hotshot wrote:I think you could get about $500 at most pawn shops that handle guns. Maybe a little more on the open market.

LOL


I think he means accuracy wise

I love my loading tray, I'm looking at one of those flash hole tools next

I am about to start loading some test batches

Does anyone have a suggestion on where to start for OAL?

i.e. .010, .020 etc. off the lands

My OAL to the lands by the OGIVE is 1.955 with my comparator


Using 39 SBK's

I'm just confused on the starting length

darn, 42 views and no suggestions

When working up a load, do you guys clean in between each load, or after so many rounds?

And do you just patch out the bore, or do you also scrub it for copper?

If the OGIVE measurement is getting close to Factory Spec COAL, you have to use Sinclair's Hex style Comparator. I ran into the same problem. One of my loads I'm liking is COAL 2.275, but I can't use my regular comparator, because it bottoms out on the case neck. I have to use the hex style, which I...

That dude is just crazy