Reloading bench

Glen · Post by **Glen** » Wed Jan 22, 2014 5:57 am

Dad has been after me for the last 6 months or so to get all his reloading things out of the basement. So about 2 weeks ago I got started here at the house. I built a 2x6 frame & laid a piece of 2/4 Oak ply over it. Built the shelves from some leftover ply from another project. Laid on 2 coats of poly. I now have the old Lyman mounted on the right, The MEC JR on the left & the powder measure mounted solid. Everything that belongs under the shelves is now back under it. I de-capped, resized, primered a little over 300 20ga yesterday. My Brother stopped last night & he reset the crimp dies for me & loaded a couple shells. Then I loaded my 1st reload. a 20ga with 7's for crows.

csand · Post by **csand** » Wed Jan 22, 2014 7:45 am

Nice job! It looks like a great place to reload.

acloco · Post by **acloco** » Wed Jan 22, 2014 4:59 pm

Very nice work!!

Rick in Oregon · Post by **Rick in Oregon** » Wed Jan 22, 2014 5:28 pm

Very nice, Glen. Maybe you could stop by here and straighten out my mess........

Glen · Post by **Glen** » Thu Jan 23, 2014 6:07 am

Thanks guys. I do dabble in woodworking so maybe that's why it looks 1/2 way decent.

Rick-- I'm certain that is a temporary look.

Now I need to figure out where to put the shotgun shells.

Bill K · Post by **Bill K** » Thu Jan 23, 2014 7:44 am

Rick in Oregon wrote:Very nice, Glen. Maybe you could stop by here and straighten out my mess........

I would repeat what Rick said, about my bench/room area also, but I am afraid you would look in the door, go

turn around and run the other direction. Very nice set up and bench you have made. Bill K

Glen · Post by **Glen** » Thu Jan 23, 2014 3:59 pm

Thanks Bill!! Like I told Rick before. I'm sure the cleanliness is merely temporary.

I did put up 100rds of 20ga this afternoon. Only another 300+ hulls to fill up!!

RIO--Bill

This is what my woodworking shop looked like a few short years ago. Does this resemble your benches?? I didn't think so!!

Bill K · Post by **Bill K** » Thu Jan 23, 2014 5:06 pm

If I could ever learn or post a photo here, I would send you one of mine, at the present. But "YES" it would look more like this one, than your new one, for sure...

Bill K

Glen · Post by **Glen** » Fri Jan 24, 2014 5:12 am

Actually that mess was from when I re-wired the garage & put in insulation & hung 1/2" OSB on the walls. Then I built a 16' bench down the right side. What a huge difference!!

I drop my pics into photobucket. Then copy the IMG code from there & paste it into the reply box. Some forum software doesn't like it when you use the Preview tab before posting when you have a pic in it. I don't know why. Maybe that's a problem if you're trying to Preview.

savageboy23 · Post by **savageboy23** » Mon Jan 27, 2014 6:37 pm

Nice bench Glen! I also am a woodworker and just finished my bench

Glen · Post by **Glen** » Tue Jan 28, 2014 5:08 am

Looks good Savage!! Your bench should work well for you!! Happy reloading!!
Are those extra shelves on top of the cabinet?

savageboy23 · Post by **savageboy23** » Tue Jan 28, 2014 8:07 pm

Yes Glen they are extra shelves. I cut a handful of shelves not knowing how many I'd use.

Glen · Post by **Glen** » Wed Jan 29, 2014 3:55 am

Looks like all you need for those extra shelves is another cabinet next to the 1st one. You have the corner space for it.

savageboy23 · Post by **savageboy23** » Tue Feb 25, 2014 6:18 pm

Finished product. Instead of a cabinet alongside my bench I made one for the top

Glen · Post by **Glen** » Wed Feb 26, 2014 5:24 am

I like the hutch idea for the back of the bench. Lots of extra storage within easy reach yet out of the way. You done good!!

Now all that's left is to tear it all down. Move it outta the way. And drywall the room!!

Reloading bench

Reloading bench

Re: Reloading bench

Re: Reloading bench

Re: Reloading bench

Re: Reloading bench

Re: Reloading bench

Re: Reloading bench

Re: Reloading bench

Re: Reloading bench

Re: Reloading bench

Re: Reloading bench

Re: Reloading bench

Re: Reloading bench

Re: Reloading bench

Re: Reloading bench