Looking for input on suppressors.
TIA
Jeff
Suppressors
-
randyman
- Senior Member
- Posts: 228
- Joined: Fri Aug 19, 2016 1:04 pm
- .204 Ruger Guns: .204 on AR platform, .20 Vartarg built from Rem. 700 SA
- Location: Butte and Lassen counties in Northern Calif.
Re: Suppressors
Unfortunately, no bueno here in smoky N.Calif.
-
Rick in Oregon
- Moderator
- Posts: 5187
- Joined: Thu Dec 01, 2005 4:20 pm
- .204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
- Location: High Desert of Central Oregon
- Contact:
Re: Suppressors
Well there, Jeff, exactly what type of input are you looking for?
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA
Oregon, East of the Cascades - Where Common Sense Still Prevails
Rick in Oregon
NRA Life/OHA/VHA/VVA
Oregon, East of the Cascades - Where Common Sense Still Prevails
-
jpx2rk
- Senior Member
- Posts: 137
- Joined: Sun Aug 14, 2016 5:25 pm
- .204 Ruger Guns: Savage 12FV, R783/20P combo
- Location: East TN
Re: Suppressors
I have a 204R and 20P, with my Harvester 300, both sound and feel (recoil) like a mouse fart. I've shot the 20P with a buddy's 22 cal DIY suppressor and my Harvester, very little difference in the felt recoil, mine is a just a bit quieter.
Master Piddler 
-
Rick in Oregon
- Moderator
- Posts: 5187
- Joined: Thu Dec 01, 2005 4:20 pm
- .204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
- Location: High Desert of Central Oregon
- Contact:
Re: Suppressors
Okay, but is there a question in there somewhere? That input you mentioned?
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA
Oregon, East of the Cascades - Where Common Sense Still Prevails
Rick in Oregon
NRA Life/OHA/VHA/VVA
Oregon, East of the Cascades - Where Common Sense Still Prevails
Re: Suppressors
I was wondering what folks were using.
Even open to what to stay away from.
It’s a fair chunk of money to throw at something that has little if anything to do with accuracy.
I ended up going with a Griffin Paladin 300. Rated for 22RF through 300WM.
After using a 5.56 and a 30 suppressor on the same rig and ammo, wasn’t enough to sway me towards a smaller “hole”.
I also shoot a fair bit of cast bullets. Nothing threaded at this point in anything I shoot CB’s in, but maybe in the future, so I have that option since this one can be taken apart for cleaning.
Even open to what to stay away from.
It’s a fair chunk of money to throw at something that has little if anything to do with accuracy.
I ended up going with a Griffin Paladin 300. Rated for 22RF through 300WM.
After using a 5.56 and a 30 suppressor on the same rig and ammo, wasn’t enough to sway me towards a smaller “hole”.
I also shoot a fair bit of cast bullets. Nothing threaded at this point in anything I shoot CB’s in, but maybe in the future, so I have that option since this one can be taken apart for cleaning.