223 rate of twist

Talk about ARs, in all their varieties!
Post Reply
User avatar
savageboy23
Senior Member
Posts: 261
Joined: Sun Jan 22, 2012 6:03 pm
.204 Ruger Guns: Rem 700 sps varmint
Location: Central Minnesota

223 rate of twist

Post by savageboy23 »

What rate of twist are most of your ar's? My stag has a 1/8 and I read its for 70-80 grain bullets. Would it still stabilize a 55 grain?
Remington 700 sps varmit with Leupold vx-3 6.5-20 adj objective HS Precision stock and timney trigger
User avatar
WY-NEvarmints
Junior Member
Posts: 71
Joined: Sat Apr 05, 2008 6:24 am
.204 Ruger Guns: AR 204
Location: Wyoming

Re: 223 rate of twist

Post by WY-NEvarmints »

I have the DPMS Panther Bull Twenty-Four and it is a 1:9 twist. I am no expert in ballistics but I'm sure there will be some from this site that are and will answer that with facts. The heaviest I have shot out of mine is 50 gr and it loves them.
User avatar
Darkker
Senior Member
Posts: 225
Joined: Tue Jan 03, 2012 3:35 pm
.204 Ruger Guns: Ruger Predator
Location: SE Washington

Re: 223 rate of twist

Post by Darkker »

Twist is MOSTLY used as an arguing tool for folks on boards. :roll:
YES, it will stabilize a 55gr bullet, or anything light. Here is the rub with twist rates.

Military uses a 7-twist,(actually I think it is 7.75) MOST commonly found is a 9-twist.
Twist rates can vary by 1/2 twist(from stated) quite frequently regardless of maker.
9-twist will stabilize(bullet LENGTH dependant, and twist variance) MOST 70gr, and some heavier.
The SMK 70gr was in fact designed for the 9-twist barrels.

Now what people forget, or don't know; is that twist... NOT velocity, kills bullets.
Hornady(spoke with them just yesterday) has a RPM limit on their SP, AND Vmax bullets of 290,000 RPM.

The formula is: MV * 720 / Twist = RPM.
So if you wanted to shoot a 40gr Vmax from YOUR barrel: 290,000 * 8 / 720 = 3,222 FPS
3200 fps is the max velocity for your gun with 40gr. Not very fast at all. MOST of the cheap bullets(SXSP, Dogtowns, etc) have thin jackets, and are limited to around 240,000 RPM.

So if you use a faster twist barrel, you may have to limit yourself to heavy bullets, or slower velocities.

Happy shooting!
I'm a firm believer in the theory that if it bleeds, I can kill it.
User avatar
savageboy23
Senior Member
Posts: 261
Joined: Sun Jan 22, 2012 6:03 pm
.204 Ruger Guns: Rem 700 sps varmint
Location: Central Minnesota

Re: 223 rate of twist

Post by savageboy23 »

Darkker wrote:Twist is MOSTLY used as an arguing tool for folks on boards. :roll:
YES, it will stabilize a 55gr bullet, or anything light. Here is the rub with twist rates.

Military uses a 7-twist,(actually I think it is 7.75) MOST commonly found is a 9-twist.
Twist rates can vary by 1/2 twist(from stated) quite frequently regardless of maker.
9-twist will stabilize(bullet LENGTH dependant, and twist variance) MOST 70gr, and some heavier.
The SMK 70gr was in fact designed for the 9-twist barrels.

Now what people forget, or don't know; is that twist... NOT velocity, kills bullets.
Hornady(spoke with them just yesterday) has a RPM limit on their SP, AND Vmax bullets of 290,000 RPM.

The formula is: MV * 720 / Twist = RPM.
So if you wanted to shoot a 40gr Vmax from YOUR barrel: 290,000 * 8 / 720 = 3,222 FPS
3200 fps is the max velocity for your gun with 40gr. Not very fast at all. MOST of the cheap bullets(SXSP, Dogtowns, etc) have thin jackets, and are limited to around 240,000 RPM.

So if you use a faster twist barrel, you may have to limit yourself to heavy bullets, or slower velocities.

Happy shooting!
Ill just have to stay at the 3100-3200 fps area when I do my loads then. Thanks Darkker.

If I did my math correctly 55 grain v-max at 3200 fps is 288,000 rpms.
Remington 700 sps varmit with Leupold vx-3 6.5-20 adj objective HS Precision stock and timney trigger
User avatar
Darkker
Senior Member
Posts: 225
Joined: Tue Jan 03, 2012 3:35 pm
.204 Ruger Guns: Ruger Predator
Location: SE Washington

Re: 223 rate of twist

Post by Darkker »

Savageboy,

I talked to Hornady a day or two ago, here is what they said about the 55gr Sp's AND VMax's.
Barrel smoothness dependant, of course. 290,000 RPM ceiling.
IF you need more headroom for spin, 55gr BlitzKings have a ceiling of 352,000 RPM; according to Sierra.
I'm a firm believer in the theory that if it bleeds, I can kill it.
User avatar
Bodei
Senior Member
Posts: 442
Joined: Tue Jan 31, 2012 9:23 pm
.204 Ruger Guns: Howa Mod 1500 24" BBL .204R; Cooper M21 20 VT; CZ 527 17HH
Location: Reno, NV
Contact:

Re: 223 rate of twist

Post by Bodei »

Sorry to burst bubbles but I just shot a bunch of V-max 40 grain .223's which I chrono'd at 3400 fps with no stabilization problems. I shot squirrels to about 250 yards with 'em. They group .41" @100 yards at the range. I have a Stag Arms 24" BBL 1:8 twist. Blows the squirrels sky high, BTW. This velocity was not even max powder load. I had max powder showing 3700 fps, but they heated up the barrel too much and were less accurate.
Image
K = ½mv2
User avatar
Darkker
Senior Member
Posts: 225
Joined: Tue Jan 03, 2012 3:35 pm
.204 Ruger Guns: Ruger Predator
Location: SE Washington

Re: 223 rate of twist

Post by Darkker »

Glad to hear it. 8-twist @ 3400 = 306,000 RPM; which is 5% different.
I don't recall saying that the world would end, merely passed on the "stated" RPM limit for a 55gr bullet, not 40gr. As with all things barrel smoothness is a big part of that.
I'm a firm believer in the theory that if it bleeds, I can kill it.
OldTurtle
Senior Member
Posts: 398
Joined: Sat Jan 28, 2006 9:42 pm
.204 Ruger Guns: Savage mod. 116 and Custom .204 AR
Location: East Central MO

Re: 223 rate of twist

Post by OldTurtle »

I had max powder showing 3700 fps, but they heated up the barrel too much and were less accurate.
... If you are running that much velocity out of an 8 twist barrel, I'm surprised that the bullets even held together....I went to a custom 1/14 barrel to push 40gr rounds at that speed and higher...
AR
Image
Factory/Factory
Image
User avatar
Bodei
Senior Member
Posts: 442
Joined: Tue Jan 31, 2012 9:23 pm
.204 Ruger Guns: Howa Mod 1500 24" BBL .204R; Cooper M21 20 VT; CZ 527 17HH
Location: Reno, NV
Contact:

Re: 223 rate of twist

Post by Bodei »

I was pretty suprised that my 40 grainers held together too, but they did! I've shot Nosler varmageddon, vmax, and sierra blitzkings in 40 grains and all shoot well with my Stag.
Image
K = ½mv2
User avatar
Darkker
Senior Member
Posts: 225
Joined: Tue Jan 03, 2012 3:35 pm
.204 Ruger Guns: Ruger Predator
Location: SE Washington

Re: 223 rate of twist

Post by Darkker »

As a note on RPM, I have many common 22-cal varmint bullets RPM's, from the manufacturers, listed over on shootersforum.
I'm a firm believer in the theory that if it bleeds, I can kill it.
clint85
New Member
Posts: 11
Joined: Tue Mar 06, 2012 10:08 am
.204 Ruger Guns: Ruger MKII .204 Ruger
Location: Alabama

Re: 223 rate of twist

Post by clint85 »

I have a Rock River NM with a 1 in 8 barrel and a Colt Match Target with a 1 in 7. They both shoot Hornady v-max 55 grain bullets very good. I'm shooting just under 25 grains of H4895.
Post Reply