different pwder

wild willy · Post by **wild willy** » Wed Dec 14, 2011 1:51 pm

I have been using 10X with sierra 39 gr. bullets I get a terrible crud (carbon) ring just in front of the chamber.Its a bear to remove.what powder could I try that might not be so bad for this ?

Tokimini · Post by **Tokimini** » Wed Dec 14, 2011 2:36 pm

I've had good luck using 8208XBR with 39 gr SBKs.

Vartarg · Post by **Vartarg** » Wed Dec 14, 2011 3:24 pm

+1 on what Tokimini said!

Also, I just bought some CFE223 and hope to have good results with it for my .204's, along with the .17 Remington.

Tokimini · Post by **Tokimini** » Thu Dec 15, 2011 7:57 am

Vartarg wrote:+1 on what Tokimini said!

Also, I just bought some CFE223 and hope to have good results with it for my .204's, along with the .17 Remington.

I thought that wasn't going to be out until February. Please keep us posted on your results. I'm very interested in seeing what this powder's performance is.

bow shot · Post by **bow shot** » Thu Dec 15, 2011 8:47 am

I'm very happy with Benchmark in my .223 and .204. Cleans up very easily so far?

btlbrn · Post by **btlbrn** » Thu Dec 15, 2011 5:39 pm

bow shot wrote:I'm very happy with Benchmark in my .223 and .204. Cleans up very easily so far?

+1 for benchmark although in .223 I have been very happy with h335

Sth Oz Dan · Post by **Sth Oz Dan** » Thu Dec 15, 2011 7:21 pm

Benchmark2(ADI) = Hodgdon Benchmark

I'm an amateur shooter, never tried other powders either, but I've had a few 5 shot groups under .75moa (factory rifle) without messing with seating depth. Didn't standardize any cases either (trim, primer pocket/flash hole uniform) but have now - no tests yet.

Don't clean my barrel too often and comes up shiny when I do

Shamu25 · Post by **Shamu25** » Thu Dec 15, 2011 7:51 pm

Benchmark is my choice also.....very tight groups and seems very easy to clean

ClaimJumper · Post by **ClaimJumper** » Thu Dec 15, 2011 9:08 pm

Wild Willie,

What is your charge of R-10X with the 39's?, mine is 25.4 and it burns clean for the bolts and AR-15 also.

I have shot lots of 32's and 39's without any buildup. My bottles are all dated 01-2010 or newer.. They did have

"Gunk" issues with early batches and recalled some. The thing I like about Alliant/Reloader powder is the Date on the bottle with lot#'s.

wild willy · Post by **wild willy** » Fri Dec 16, 2011 12:41 pm

My load is 25.1 with the 39gr My powder is Nov. 08.Your post is the first I heard anything about a recall

ClaimJumper · Post by **ClaimJumper** » Fri Dec 16, 2011 8:00 pm

Of course the old link is now broken. The powder was not dangerous just left a "gunk" in the barrel. from 2007.

Alliant Powder recall - KTOG - Kel Tec Owners Group Forum

http://www.alliantpowder.com/products/recall.htm.

Please pass around to reloaders. ... There have been other powder recalls. It happens .... Reloading - PLR-16 & Alliant RL-10X, .
Get more discussion results

wild willy · Post by **wild willy** » Sun Dec 18, 2011 6:36 pm

Thanks for the tips.I got a pound of 8208XBR to try.

different pwder

different pwder

Re: different pwder

Re: different pwder

Re: different pwder

Re: different pwder

Re: different pwder

Re: different pwder

Re: different pwder

Re: different pwder

Re: different pwder

Re: different pwder

Re: different pwder