finally got some RL10 need some good loads

Share information about reloading the .204 Ruger.
Post Reply
varmit_master
Senior Member
Posts: 102
Joined: Mon May 06, 2013 4:30 am
.204 Ruger Guns: TC 204
Location: Arkansas

finally got some RL10 need some good loads

Post by varmit_master »

I pick up me 6 PDS of RL,10 for my 204. I thought 6 PDS would do me a long time. The bullets I have 32 gr z max 32 gr nosler var. Jhp and 40 gr nosler bt and 40 gr v max and 40 gr accu tips. My gun is a 1@10 twist using Winchester brass Remington bench primers. Any data anybody have that can help.TY my reloading books all give different max.
User avatar
RAMOS
Senior Member
Posts: 765
Joined: Sat Nov 21, 2009 9:30 am
.204 Ruger Guns: Savage Model 12 FLV, Cooper M21
Location: Sherman County, Oregon

Re: finally got some RL10 need some good loads

Post by RAMOS »

I will try to remember to check my data tonight. It would be for RL10X, 32gr V-Max/35gr Bergers, WW brass and Federal 205M/Rem 7 1/2 primers.
User avatar
RAMOS
Senior Member
Posts: 765
Joined: Sat Nov 21, 2009 9:30 am
.204 Ruger Guns: Savage Model 12 FLV, Cooper M21
Location: Sherman County, Oregon

Re: finally got some RL10 need some good loads

Post by RAMOS »

I have been using 25.8 grains of RL10X with the 32 grain V-Max for 4,075 FPS. Very accurate, as well. I did, however, work up to this load and I also keep the ammo cool. Be safe and work your load up slowly.
User avatar
Rick in Oregon
Moderator
Posts: 5207
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: finally got some RL10 need some good loads

Post by Rick in Oregon »

All four of my 204's seem to like RL-10X, with both the 32's and the 39/40's. I don't shoot much paper, mostly hair, but here's a target from my files showing a 10X load with the 32 grainer from my Cooper MTV after I had the factory shorten the barrel to the much more friendly length of 24":

Image

That won't win any matches, just a target shot in the field, but shows that 10X is a friend to the 204 Ruger. Note that this particular rifle gave a lower velocity for a bit more powder than Ramos' load shown above. Just goes to show that every barrel is different, and you should work up a 10X load for your own rifle.

Please do not duplicate either of these loads without first working up from a safe starting load, as either/both of these loads could be above maximum in your rifle.
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
User avatar
ClaimJumper
Senior Member
Posts: 117
Joined: Thu Nov 17, 2011 12:31 am
.204 Ruger Guns: 3 custom .204's,22-250ai, 5-223, 6br Norma, Savage builds
Location: Sunriver, Oregon

Re: finally got some RL10 need some good loads

Post by ClaimJumper »

Most of the R10 I have varies by lot numbers (20+lbs) be careful when working with data from the web on this powder.
12 Twist Savage model 12 (550$ rifle)

Image
Image

Retired Timber faller
TwentyBore
Junior Member
Posts: 77
Joined: Sat Jun 22, 2013 1:34 pm
.204 Ruger Guns: Savage 12FV

Re: finally got some RL10 need some good loads

Post by TwentyBore »

39 gr. Sierras over RE-10X right up at the max end of the range makes my rifle haaaaaappy.
RowdyYates
Senior Member
Posts: 267
Joined: Sat Jan 02, 2010 4:51 pm
.204 Ruger Guns: Remington LVSF, Cooper M21V, C-Z 527 Kevlar V

Re: finally got some RL10 need some good loads

Post by RowdyYates »

TwentyBore wrote:39 gr. Sierras over RE-10X right up at the max end of the range makes my rifle haaaaaappy.
Thanks for the info, 20B! I have both and a mix of primers to try.
varmit_master
Senior Member
Posts: 102
Joined: Mon May 06, 2013 4:30 am
.204 Ruger Guns: TC 204
Location: Arkansas

Re: finally got some RL10 need some good loads

Post by varmit_master »

Rick that is a great group all of them are. I just have a TC venture rifle 1@10 twist is why I bought it. So I could shoot 40 gr bullets too. I have it topped with a Nikon Buckmaster 6x18x40mm with target dot. When I fount the 32 gr z max bullets on sale I bought up like 4000 do me for ever. I was got to looking at ya's load data I look every where for RL10 . My local gun shop got a few cases in. I bought 6 cans . They still have a bunch think I will pick up 3 more cans that will do me forever. I like RL powder I use 15,19,22. Hope that gun of mine groups as good as Rick's. The fox cats and crows better watch out. I looked for some sierra bking 32 and 39 gr to try. I fount them at one shop 29.99+ tax a box I don't need them that bad.. Does Sierra have 2nds in 20 cal all the time we are going up by that way on vacation?
dan97526
Senior Member
Posts: 109
Joined: Sun Nov 11, 2007 9:21 pm
.204 Ruger Guns: Cooper M21, Cooper 38 20VT, CZ 17H
Location: Grants Pass, State of Jefferson (formerly Oregon)

Re: finally got some RL10 need some good loads

Post by dan97526 »

23.8 gr of RL-10X under a 39gr Blitzking is a very accurate and mild load in my Cooper. It's far enough off of maximum that I almost never lose sight picture on impact.
varmit_master
Senior Member
Posts: 102
Joined: Mon May 06, 2013 4:30 am
.204 Ruger Guns: TC 204
Location: Arkansas

Re: finally got some RL10 need some good loads

Post by varmit_master »

I hope mine groups that good. My family and I r going on vacation we r go by Sierra hoping to score on some 2nds Sierra 39 gr bking. Want some to try. But I was reading the nosler 20 cal lead free has the best BC of the 20 anybody used any?
varmit_master
Senior Member
Posts: 102
Joined: Mon May 06, 2013 4:30 am
.204 Ruger Guns: TC 204
Location: Arkansas

Re: finally got some RL10 need some good loads

Post by varmit_master »

I hope mine groups that good. My family and I r going on vacation we r go by Sierra hoping to score on some 2nds Sierra 39 gr bking. Want some to try. But I was reading the nosler 20 cal lead free has the best BC of the 20 anybody used any?
User avatar
TucoTom
New Member
Posts: 22
Joined: Mon Jul 09, 2012 11:14 pm
.204 Ruger Guns: Cooper M21
Location: Boise, Idaho

Re: finally got some RL10 need some good loads

Post by TucoTom »

204 Ruger Target: Point of Aim was half way between 10X Dot & bottom of sticker.

Image
rbp75503
New Member
Posts: 10
Joined: Mon Mar 24, 2014 11:31 am
.204 Ruger Guns: Black Rain Shilen Barrel
Location: Texarkana TX

Re: finally got some RL10 need some good loads

Post by rbp75503 »

I am in the initial stages of finding the right RL10X loads for my 1-9" Shilen barreled Black Rain Ordnance. For the Barnes 26GR Varmint Grenade 24.0gr of RL10X seems to be the best. 5 round groups at 100Yds.

Image
Post Reply