204Ruger

Posted: **Mon Jul 30, 2007 8:25 am**

What is your favorite primer for the 204 Ruger?

Posted: **Mon Jul 30, 2007 8:29 am**

My choice is not listed.

...

The one that works best for the load involved.

Posted: **Mon Jul 30, 2007 8:35 am**

I had intended to use the cci br-4s but they are over 32.00 per 1000, the 71/2 are 16.00 per thousand, so far they have worked great! so i'll stick with the Remington 7 1/2s

Posted: **Mon Jul 30, 2007 9:04 am**

+1 to waldo.

Posted: **Mon Jul 30, 2007 4:25 pm**

Is there another primer for the .204 Ruger besides the CCI BR-4???

Posted: **Mon Jul 30, 2007 5:49 pm**

I use Sherwin-Williams for all my painting needs.

Tip of the day
Never buy paint at Home Depot

I'll go away now

Posted: **Mon Jul 30, 2007 6:10 pm**

Where did that come from???

Did I do that?

Posted: **Mon Jul 30, 2007 6:18 pm**

WSR's. We shoot about 6 different rifles & they all like the WSR's. Plus when one of the 4 of us are out we just pick up a few boxes each time & we don't run out.

Posted: **Mon Jul 30, 2007 6:31 pm**

No Skipper Just some strange humor on my part. Its been awful hot underneath my hard hat lately.

My fellow coworkers have to put up with unintelligable comments like that all day. Pity them.

Posted: **Mon Jul 30, 2007 11:55 pm**

I find that my gun likes the WSR primers, but that is the only primer I have used.

Posted: **Tue Jul 31, 2007 7:59 pm**

I have only used 205 and 7-1/2, so far I like the Remington primers better for H 4895. I ordered some CCI BR4 to try out. When I was testing out some loads I chroned 39 BK with 29.4 Grains of BLC (2) and fed primer and the mv was 3827. I thought that was a little fast for that charge and I took out some factory 40 v-max to chrone ( I have chroned them before at 3839) and they chroned at 3997. The temperature was 95 F, do you think that was enough to increase the pressure to create those velocities?

Posted: **Tue Jul 31, 2007 11:27 pm**

Only 27 people on this board handload? Right...

Posted: **Wed Aug 01, 2007 7:36 pm**

CCI 450 has served me very well.

Posted: **Thu Aug 02, 2007 6:26 pm**

Everyone I know is using BR-4 so that's what I'm going to start with.

204Ruger

Whats your favorite primer?

Whats your favorite primer?